Powered by SimulTask™ 6, next‑gen image intelligence, The MAXIMIZER RMI+ is a high-performance poultry x-ray inspection system built for harsh washdown environments. Its wider belt design increases throughput while providing accurate bone and contaminant detection to help reduce waste and maximize production efficiency.
Experience the evolution of intelligent x-ray inspection performance.
Designed to adapt to evolving applications, line speeds, and operational requirements, SimulTask™ 6 provides a scalable software platform that delivers clear data interpretation and repeatable detection results across production environments.
SimulTask™ 6 enhances product quality and yield with:
Raw, fresh, unpackaged boneless poultry products (breasts, tenders, thighs, nuggets, or legs); separated or bulk
Metal, glass, stone, bone, high-density plastics, rubber, low-density contaminants
Bones, contaminants, mass, grading
User management, guided performance verification routine (PVR), machine health checks, reject bin
monitoring, risk-assessment support
Single or multi-lane system
Up to 73 m/min (240 ft/min); conveyor speed ranges are determined by the selected motor
Up to 120 products/min per lane
Up to 75 mm (2.95”); see beam geometry limits
0.1–0.8 mm PXT™ photon-counting detector options; 0.4 mm standard
500 W, up to 100 kV, up to 5 mA, beryllium or glass tube
15.6” PCAP touchscreen, Full-HD (1920 × 1080), 250 GB memory
Windows 11 LTSC
SimulTask™ 6
Eagle Repository™, TraceServer™, PDF reporting, centralized storage, OPC-UA, Ethernet/IP
Up to Category 3 / PLd (EN13849) safety circuit with HMI visibility, LOTO disconnect, compliant to 21 CFR 1020.40, 21 CFR 179.21; <1 μS/hr emissions
IP69; type 304 stainless steel; surface finish less than 0.8μm/32μ-inch RA (ISO 21920-3);
designed to NAMI Sanitary Guidelines, EHEDG, NSF, ISO, and CE standards where feasible
0–24°C (32–75°F), 25–90% RH non-condensing
230 VAC ±10%, single phase, 50/60 Hz, FLA 16.0A
8k BTU shrouded AC (IP69)
Not required for base machine; rejects may require 5.5 bar (80 psi), 3/8” line; dry and filtered air supply
(8) rejects, (5) inputs, (9) outputs; (4) PLC monitoring signals for: system processing, system calibrating, fault condition, x-rays on
Free standing single or dual lane short retracting nose reject; reject actuation confirmation available
TeamViewer™ or customer-specific solution for remote service, diagnostics, and product set-up assistance; 24-hr support
2 station: 4,788 mm (188.5”); 4 station: 5,578 mm (219.6”)
1,219 mm (48”); 1,524 mm (60”); additional heights upon request
536 mm (21.1”)
See how the MAXIMIZER RMI delivers measurable improvements in bone and metal detection using advanced imaging technology and data-backed performance results from real-world poultry applications.
Talk to an Expert
Fill out the form and an expert will contact you within the next 48 hours.
"*" indicates required fields
Eagle’s hygienic x-ray detection systems support a wide range of poultry products and are designed for the most stringent washdown environments, whether products are raw, frozen, pumped, or packaged. Explore our solutions to learn more.
Accurate inspection data helps food and packaging manufacturers protect product quality, support compliance, and improve production efficiency. Next-generation x-ray image processing, SimulTask™ 6 transforms inspection images into real-time insights that help teams detect contaminants, verify product quality, reduce downtime, and respond quickly to production changes.
PXT™ photon-counting x-ray technology, combined with SimulTask™ image analysis software, delivers high-resolution images and real-time analysis in just one-tenth of a second, setting a new standard in detecting bones, metal, and other contaminants.
PXT™ photon-counting x-ray technology is an advanced dual energy detector that delivers high-resolution images and detailed product data, improving detection accuracy in complex products and reducing false rejects.
Eagle’s TraceServer™ x-ray software centralizes production data and machine status from up to 32 x-ray machines into one database. It records inspection processes to help meet quality standards and is scalable to fit your company’s needs, simplifying product traceability.
Send us your product for a free test, and you’ll receive a detailed report with machine configuration, inspection data, and the Probability of Detection (POD) as a percentage, reflecting real production conditions.
This system features dual lanes that run up to 120 pieces per minute per lane and the reject review station is expandable to meet production needs. With up to 6 trimmers all working simultaneously, more products are inspected and processed in less time, maximizing output.
A hygienically constructed machine built for advanced detection to overcome the material handling challenges of inspecting large raw or unpackaged poultry products.
PXT™ advanced dual energy technology detects low-density foreign materials, including bone fragments, reducing false rejects and improving product output.
Find and reject low-density bone fragments, 1 mm or less, in various poultry applications at high-line speeds.
Reliable detection of stainless steel, ferrous, and non-ferrous metals in a broad range of applications.
Advanced detection of physical contaminants for a variety of sizes, shapes, or location within a product.
Mass measurement adds an extra layer of process control and due diligence for better overall quality.
Precise, configurable sorting based on weight, count, or physical values enables yield optimization.
Detailed reject classification reveals patterns earlier, helping quality teams identify root causes and reduce rework.
Inspection data is continuously captured and structured to support performance analysis, traceability, and continuous improvement.
Continuous performance monitoring helps keep inspection results reliable and consistent over time.
Eagle by METTLER TOLEDO offers comprehensive service solutions for x-ray FA systems. Keep your equipment performing at its best with Eagle’s 24/7 technical support, remote diagnostics, and preventive maintenance agreements that help reduce breakdowns and wear.
Discover the key inspection points for x-ray systems in poultry processing and how they help optimize operational efficiency.
Find out how to combat bone detection in poultry with advanced x-ray and PXT™, Performance X-ray Technology.
Poultry processor integrates RMI 400 with PXT™ for superior bone detection and increased food safety.
Unlock the Benefits of X-ray Food Inspection: A Comprehensive White Paper for Processors
Here are answers to common questions poultry processors ask before choosing a system:
A poultry x-ray inspection system is automated equipment that uses x-ray imaging to detect bones, metal, and other contaminants inside raw or processed poultry before it ships. The MAXIMIZER RMI+ does this using photon-counting x-ray technology PXT, at over 120 pieces per minute per lane.
The MAXIMIZER RMI+ processes over 120 pieces per minute per lane, combining x-ray inspection with automated rejection. Belt speeds range from 10 to 50 meters per minute, with achievable throughput depending on product dimensions and system configuration.
The MAXIMIZER RMI+ features easy disassembly and reassembly for sanitation, helping operators access areas where raw poultry residue can accumulate. Its hygienic constructions and IP69-rated enclosure support the high-pressure, high-temperature washdowns used in poultry processing.
The MAXIMIZER RMI+ is powered with PXT™ dual energy photon-counting technology and SimulTask™ PRO image analysis software that work together to improve contaminant detection accuracy. By enhancing material discrimination and analyzing inspection images in real-time, they help distinguish true contaminants from normal product variation, reducing false rejects while maintaining inspection sensitivity.
.svg)
