Pack 1000: X-ray Inspection of Large Packaged Product

Pack 1000

• Primary Application

  Large packaged goods in cartons, cases, sacks, bags, pouches, cups, tubs, trays, and other packaging

• Contamination Detection

  Metal, glass, stone, bone, high-density plastics, rubber, low-density contaminants

• Product Quality and Integrity Inspection

  Missing item, clip, count, void, broken-item, mass, sorting, shape, package integrity

• Compliance/Validation/ Reporting

  User management, guided performance verification routine (PVR), machine health checks, reject bin
  monitoring, risk-assessment support

• Lane Configuration

  Single or multi-lane system

• Conveyor Speed

  Up to 76 m/min (250 ft/min); conveyor speed ranges are determined by the selected motor

• Throughput

  Up to 1000 products/min

• Maximum Product Height

  Up to 609 mm (24”); see beam geometry limits

• Detector Technology

  1.2 mm MDX dual energy

• X-ray Generator

  HR7, up to 140 kV, up to 1 mA glass tube; HR9N, up to 140 kV, up to 3 mA glass tube

• HMI

  15.6” PCAP touchscreen, Full-HD (1920 × 1080); 250 GB memory

• Operating System

  Windows 11 LTSC

• Inspection Software

  SimulTask™ 6

• Traceability/Reporting/ Connectivity

  Eagle Repository™, TraceServer™, PDF reporting, centralized storage, OPC-UA, Ethernet/IP

• Safety Features

  Up to Category 3 / PLd (EN13849) safety circuit with HMI visibility, LOTO disconnect, compliant to 21 CFR 1020.40, 21 CFR 179.21; <1 μS/hr emissions

• Ingress Protection / Hygienic Features

  IP65 or IP69; type 304 stainless steel

• Operating Environment

  0–40°C (32–104°F); 25–90% RH non-condensing

• Power Supply

  230 VAC ±10%, single phase, 50/60 Hz, FLA 9.0A

• Cooling

  8k BTU waterless AC (IP65); 8k BTU shrouded AC (IP69)

• Compressed Air

  Not required for base machine; rejects may require 5.5 bar (80 psi), 3/8” line; dry and filtered air supply

• External Interface

  (8) rejects, (5) inputs, (9) outputs, and (4) PLC monitoring signals for: system processing, system calibrating, fault condition, x-rays on

• Reject Options

  24 VDC signal, side push arm; other rejects and reject verification sensors available upon request

• Remote Service

  TeamViewer™ or customer-specific solution for remote service, diagnostics, and product set-up assistance; 24-hr support

• Conveyor Length

  1,981 mm (78”)

• Conveyor Height

  762–1,219 mm (30–48”); additional heights upon request

• Inspection Area at Belt

  1,018 mm (40”)